‎Base Station | SimpliSafe Support Home

Conversation List

Filter by

  • Where Should I Place My Base Station?

    The Base Station should be placed in a centrally-located area within your home or business, and in an open space. It is recommended that the Base Station is elevated at least 3 feet off the ground on a non-dense surface (ideally glass or wood). The following floorplan illustrates the recommended pla

    Help Center Article

  • Base Station Installation Guide

    Overview The Base Station is the brains of your system. It sends alarm signals to the monitoring centre* with built-in network backup and Wi-Fi connections, a battery backup that lasts up to 24 hours, and a 100 dB siren. When a sensor on your system is triggered, it sends a signal to the Base Statio

    Help Center Article

  • Can't Connect Base Station to Wi-Fi During Setup

    If you are having trouble connecting your system to Wi-Fi during a first-time setup, we recommend making sure that your home network is configured to meet our system requirements. A short list of requirements can be found below: Your Wi-Fi network must be broadcasting 2.4GHz SimpliSafe® cannot conne

    Help Center Article

  • How to Find the Serial Number for Your SimpliSafe® Device or Camera

    During troubleshooting or for account verification purposes, you may be required to identify the serial number for a product within your system. You can easily find the serial number for your devices or cameras within the SimpliSafe® Mobile App. Locating the Serial Number for your Base Station in th

    Help Center Article

  • What does the error "Power Outage" mean?

    In the event that you lose power, your Base Station has four (4) NiMH (nickel-metal hydride) rechargeable batteries that can keep your system powered for up to 24 hours. During this time, you’ll still be able to arm and disarm your system using the Keypad. You’ll be able to live stream from your Sim

    Help Center Article

  • How To Check The Firmware Version of SimpliSafe® Devices

    At SimpliSafe®, we are always working on our devices by releasing firmware and software updates for system-wide and device-specific improvements. If you are ever curious about the firmware that your system and cameras are running, take the steps below. Checking the Base Station’s firmware You can vi

    Help Center Article

  • Why is my Base Station Pulsing Red?

    The Base Station can pulse red for two different reasons. Depending on the length of the pulse or the timing between it, it can mean different things. Slow Pulse, with 8-10 seconds between each pulse This indicates that there is a minor system error, such as radio interference. You can check the Key

    Help Center Article