Base Station

A powerful home security system built for the unexpected The Gen 3 SimpliSafe® system is our upgraded DIY security system and the only system sold in the UK, with features added to provide homeowners peace of mind. This third-generation of our security system is Wi-Fi compatible, has more than doubl

Once the battery tab is removed from the Base Station, you should see the white searchlight come on to indicate the device has power. In the event that you are not seeing a white light, resetting the Base Station should get things working again. Before Getting Started You’ll need to have a Phillips

Your Base Station comes pre-installed with four (4) NiMH (nickel-metal hydride) type rechargeable batteries, which are kept charged by your Base Station. These batteries should never need to be replaced over the lifetime of your Base Station. However, if there is a technical issue with the batteries

This setting adjusts the length of time that your Base Station (and Auxiliary Siren) will sound in the event of an alarm. The default for this setting is 4 minutes, but it can be set anywhere between 30 seconds and 8 minutes through the SimpliSafe® Mobile App, Keypad or Web App. SimpliSafe® Mobile A

The Base Station’s siren has four volume settings: Off, Low, Medium, and High, and by default it is set to High. You can change the siren’s volume using the SimpliSafe® Mobile App, Web App, or Keypad by taking the following steps: SimpliSafe® Mobile App: Navigate to the “My System” gear on the botto

When adding a Base Station to your system, you may run into an “Invalid Base Station Serial” error message in the SimpliSafe® Mobile App. This could be due to one of two reasons: The Base Station’s serial number was entered incorrectly while setting up your system You are completing a Base Station r