‎Smart Locks | SimpliSafe Support Home

Conversation List

Filter by

  • What Happens if I put in the wrong PIN on the PIN Pad?

    You have 4 attempts to enter one of your PINs on your Smart Lock’s PIN Pad. Starting on the 5th attempt of entering the wrong PIN on the PIN Pad, the Smart Lock will initiate a number of safety measures to ensure that your home is safe. Attempt Backoff Delay Behavior 1-4 - - 5-10 30 seconds must pas

    Help Center Article

  • Smart Lock Series 2 Overview and Installation Guide

    Overview The Smart Lock Series 2 makes sure that your door is always locked—even if you forget. It secures your door the minute you arm your system and unlocks it when you disarm. You can even set a timer to keep your door locked when you need it most. You don't even need a key*—just use the PIN Pad

    Help Center Article

  • How to Find the Serial Number for Your SimpliSafe® Device or Camera

    During troubleshooting or for account verification purposes, you may be required to identify the serial number for a product within your system. You can easily find the serial number for your devices or cameras within the SimpliSafe® Mobile App. Locating the Serial Number for your Base Station in th

    Help Center Article

  • Smart Lock Not Responding

    If you hear the Base Station announce “Smart Lock Not Responding” while trying to lock or unlock your Smart Lock, it could be due to one of the following reasons: The batteries in your Smart Lock need to be replaced The Smart Lock cannot communicate with the Base Station Its firmware needs to be upd

    Help Center Article

  • How to Replace Smart Lock Series 2 Batteries

    The Smart Lock Series 2 is powered by 4 Duracell AA Alkaline batteries, and the PIN Pad takes 2 Duracell CR2450 Lithium Batteries. The Smart Lock and PIN Pad batteries have a life expectancy of 8-12 months, depending on usage. If your Smart Lock is still offline after replacing the battery, skip to

    Help Center Article

  • Smart Lock Overview and Installation Guide

    Overview The SimpliSafe® Smart Lock makes sure your door is locked, even if you forget to lock it yourself. It locks your door the minute you arm your system, or automatically on a timer. And it unlocks the moment you disarm your system. The Smart Lock integrates seamlessly with your SimpliSafe® sys

    Help Center Article

  • Smart Lock Settings & Customizations

    Your Smart Lock can be customized for each of the alarm states of your system (Off, Home, and Away). It can also be customized to use AutoLock, which locks your door after a certain interval of time when it’s unlocked. By default, your Smart Lock will automatically lock your door when you set the sy

    Help Center Article