At SimpliSafe®, we are always working on our devices by releasing firmware and software updates for system-wide and device-specific improvements. If you are ever curious about the firmware that your system and cameras are running, take the steps below.

Checking the Base Station’s firmware

You can view which firmware version your Base Station is running using either the SimpliSafe® Mobile App or  Keypad.

Using the SimpliSafe® Mobile App

1. Open up the SimpliSafe® Mobile App on your smartphone or tablet

2. Select My System from the navigation bar at the bottom of the screen

3. Choose Base Station Settings

4. Next to Firmware, you will see which version your system is running

Using the Keypad

1. Press the Menu button on your Keypad

2. Enter your Master PIN

3. Select System Settings

4. Scroll down to Diagnostics

5. Press the right arrow until you see Base Station

6. Next to Version, you will see what firmware your system is running

Checking a camera’s firmware

You can view your camera’s firmware in the SimpliSafe® Mobile App

1. Open up the SimpliSafe® Mobile App on your smartphone or tablet

2. Select My System from the navigation bar at the bottom of the screen

3. Choose Camera Settings

4. Select the camera you want to check

5. Scroll down to the bottom of the screen until you see Basic Info

6. Next to Software Version, you will see what firmware your camera is running

Related Articles

• Updating your SimpliSafe® System

The Wireless Outdoor Security Camera provides an extra set of eyes outside of your home, to alert you to potential threats before an issue occurs. The following article will walk you through some common issues that may occur, along with the steps you can take to troubleshoot the issues and work towards a resolution.

You may scroll through the article, or select a topic from the list below to navigate directly to that section.

• Incomplete Recordings

• Delayed Live Streaming or Trouble Live Streaming

• Not Recording or Live Streaming

• Camera Does Not Detect People

• Two-Way Audio is not Working

• Videos Not Showing up in Timeline

Incomplete Recordings

Incomplete camera recordings can often be a symptom of an underlying network connectivity issue. To rule out any temporary connectivity issues, we recommend rebooting your router - especially if it’s been a while since you’ve done this. To reboot your router, simply unplug it from power for 30-60 seconds, then plug it back in. This will provide a fresh connection for your network devices.

If you’re still having trouble after a router reboot, we’d recommend using the Connection Check Tool found within the SimpliSafe® Mobile App to further analyse your network connectivity.

Delayed Live Streaming or Trouble Live Streaming

To optimise battery life the Wireless Outdoor Security Camera enters a “deep sleep” mode when not in use. When a live stream is initiated, the camera must first wake up and then connect to Wi-Fi to start the stream. This process can take up to 10 seconds.

If you are concerned about this delay or are experiencing a delay longer than 10 to 15 seconds, you can try the below steps to troubleshoot your camera’s Wi-Fi and system connectivity

• Move the Base Station closer to the camera

• Ensure your Base Station is connected to Wi-Fi

• Bring the camera and your internet router close together

• If the Camera works in this position, there may have been too great a distance between the devices and you will need to install the camera closer to your internet router

• You can also purchase a Wi-Fi extender to extend the range of your Wi-Fi

If the camera still does not connect when it is right next to your router, you may be experiencing Wi-Fi connectivity issues; in this case, you can try to troubleshoot your Wi-Fi connection.

Not Recording or Live Streaming

If your camera is not recording or live streaming, there are three main factors that you can check for - environment, connectivity, and battery.

Environment

The Outdoor Camera’s optimal temperature threshold is -20°C to 50°C. If the camera overheats from high usage and its temperature rises above 48°C, it will shut down in order to protect the battery from damage or catching fire. Once the camera has cooled back down, it will turn back on and resume functioning.

Connectivity

If you have ruled out both battery and environmental issues, you can try to troubleshoot your Wi-Fi connection.

Battery

1. Remove the battery from the camera

2. Connect it to power using the in-box USB charging cable

   1. If the three lights on the battery do not all light up, it is not fully charged

   2. The Outdoor Camera charges fully in just 6 hours for a battery life of up to 3 months

3. Ensure your battery is into the camera with the three metal dots lined up with the metal lines inside the camera and the tab facing out

4. Check to see if the lens of the camera is aligned with the speaker facing down and tightened fully

Camera Does Not Detect People

Our Cameras have a wide field of view to maximise coverage inside and outside of your home. If you find that your camera is not detecting people or motion, there are a few steps you can take to improve its’ functionality.

For the Outdoor Camera, Smart Alarm Wireless Indoor Security Camera, and Video Doorbell Pro, you have three options for controlling motion detection:

• Sensitivity for Motion Detection

• Motion Type

• Activity Zones

To note, SimpliCam Wired Indoor Camera only allows you to control Sensitivity for Motion Detection.

Sensitivity

The sensitivity allows you to control how precise the camera is at detecting motion. We generally recommend setting this to medium for most homes.

Motion Type

This allows you to choose between tracking all motion, and people only. For the Smart Alarm Indoor Camera, we recommend setting this to People Only, especially if you have pets within your home.

Activity Zones

This allows you to configure your camera to track motion within a certain parameter or exclude tracking it for other areas such as a busy street or pavement.

To improve motion detection, open the SimpliSafe® Mobile App and follow these steps:

1. Choose the Cameras tab at the bottom of the app

2. Tap on the Gear Icon in the upper right corner

3. Select your Camera

4. Tap on Motion Detection

On this screen, you’ll be presented with the option to adjust the sensitivity, motion type, and even set activity zones, depending on your camera.

If your camera is still not detecting people, we recommend resetting it. You can find the steps to reset each of our SimpliSafe® cameras in the Help Centre articles below:

• How to Reset the Smart Alarm Wireless Indoor Security Camera

• How to Reset the Wireless Outdoor Security Camera

• ​How to Reset the SimpliCam® Wired Indoor Security Camera

• ​How to Reset the Video Doorbell Pro​

Two-Way Audio Is Not Working

The Wireless Outdoor Security Camera has a Two-Way Audio feature that works with a simple tap of the speaker button, unlike the SimpliCam® indoor camera where you hold the button while talking and release it to hear. Holding down the Outdoor Camera speaker button will not allow the two-way audio to work properly.

In order to test two-way audio, you should stand far away or in another room from the camera and have someone else stand near the camera. This is because the camera will automatically detect and mute any echo it hears, including one caused by the sound looping between the camera and your phone’s speakers.

Videos Not Showing Up in the Timeline

Video recordings are only available to users who are subscribed to select monitoring plans. If you do have a monitoring subscription with recordings and are not seeing videos from your cameras on your timeline in the SimpliSafe® Mobile App, you’ll need to ensure that “Motion Events” are turned ON within the motion detection settings.

1. Open the SimpliSafe® Mobile App on your phone or tablet

2. Select the Cameras tab at the bottom of the app

3. Choose the gear icon for Camera Settings in the upper right corner

4. Choose the camera you wish to make changes for

5. Select Motion Detection

6. Toggle Motion Events ON

7. Click Save in the upper right corner to save your settings before exiting

Overview

The Wireless Outdoor Security Camera and Outdoor Security Camera Series 2 require a Base Station running the latest firmware. The “Update Software” error typically means that you need to update your Base Station’s firmware.

Not sure what version of the firmware is installed on your system? You can check the version at any time using the SimpliSafe® Mobile App.

Please note: Your system must be connected to Wi-Fi to receive firmware updates. You can learn more about connecting your system to Wi-Fi on our Help Centre.

How To Fix It

If your System is Running Firmware Below 2.15

For systems running a version of firmware below 2.15, you will need to manually update your system. You can do this using the SimpliSafe® Mobile App or your Keypad. 

Using the SimpliSafe® Mobile App:

1. Open the SimpliSafe® Mobile App on your phone or tablet

2. You should see a tile on the Overview tab detailing there’s an “Update Available”

3. You may also manually check for updates using the following steps:

1. Choose My System from the bottom navigation bar

2. Select Base Station Settings

3. If an update is available, it will say so to the right of “Firmware”

Using the Keypad:

1. Press Menu

2. Enter your Master PIN

3. Select System Settings

4. Then, Check for Updates

If your System is Running Firmware Version 2.15 or Greater

For systems running firmware version 2.15 or greater, updates will occur automatically after you disarm your system and it has been disarmed for at least 10 minutes. This ensures that you are never without protection when your system updates and that you’re home during the update process. You’ll be able to tell that an update is running when you see an amber or orange-colored light circling the Base Station, similar to a “searchlight”. You can tell when an update occurred by checking the Message Centre within the SimpliSafe® Mobile App.

With the Outdoor Camera Solar Panel, you can power your Outdoor Camera without the need to separately recharge or replace the battery—like a traditional wired outdoor security camera, while retaining install-anywhere convenience. With just 3 hours of direct sunlight per day, the water-resistant Solar Panel keeps your Outdoor Camera charged at all times.

Thanks to its 13 foot power cord, the Solar Panel doesn’t need to be installed in the same place as your camera. Simply run the cable to the Outdoor Camera and use the included cable management velcro sleeve to neatly tuck unused cable behind the solar panel.

Physically Installing Your Solar Panel​

First, you’ll need to find a location within 13 feet of your Outdoor Camera. This should be a spot that receives at least 3 hours of direct sunlight per day.

Next, you’ll need the appropriate tools to install your Solar Panel. 

If mounting on brick/stucco/stone surfaces:

• Use a ¼” masonry drill bit to drill two pilot holes into the surface

• Then, use the included anchors and screws to attach the Solar Panel to the wall

If mounting on wood or vinyl surfaces:

• Screw the self-tapping screws directly into the wall using a handheld screwdriver

• Wood surfaces generally do not require pre-drilled holes

After mounting the Solar Panel, use the omnidirectional mount to aim it towards the direction that will give it the most access to sunlight.

Finally, secure any excess power cord by wrapping it around the base of the Solar Panel, then using the cable management velcro straps to ensure the cord will not get tangled or caught by inclement weather or small animals. 

Troubleshooting

The Solar Panel is designed to maintain your Outdoor Camera’s battery life, not to recharge it. If you find that your Solar Panel is not keeping your camera battery topped off, there are a few steps you can take to try and resolve this.

*The Outdoor Camera battery is only compatible with a SimpliSafe® Outdoor Camera Solar Panel, not with any third-party solar panel devices.

There are two main reasons that a camera may lose its Wi-Fi connection. It may be installed too far from your Wi-Fi router, or it may not have sufficient bandwidth.

If Your Camera Will Not Connect to Wi-Fi During Initial Setup

If you are having trouble connecting your camera to Wi-Fi during a first-time setup, we recommend making sure that your home network is configured to meet our system requirements.

• Your Wi-Fi network must be broadcasting 2.4GHz

• SimpliSafe® cannot connect to 5GHz networks

• Your SSID and password cannot exceed more than 31 characters each

• Your network must be configured as WPA2 or WPA3/2 Mixed Mode

• WPA3 only networks are not compatible with SimplISafe® at this time

If Your Camera Will Not Connect After Its Setup

If your camera had previously been set up but is now failing to connect to your Wi-Fi network, the Connection Check tool in the SimpliSafe® mobile app will tell you if there are any issues between your network and camera.

How to Run a Connection Check:

1. Open the SimpliSafe® Mobile App

2. Tap on the Cameras tab on the bottom of the screen

3. Select the gear icon in the upper right corner

4. Choose your camera

5. Select Connection Check and follow the on-screen instructions to test your signal strength and upload speeds

Using your results, you can improve your camera’s connection with the tips below.

Camera Wi-Fi Requirements:

• Signal strength should be above -55dBm. A lower number means a weaker connection between your camera and Wi-Fi router

• If you have a low signal strength, try troubleshooting your Wi-Fi network

• Upload speeds need to be above 2Mbps

• If your upload speed is below 2Mbps, you may need to contact your internet service provider to upgrade your internet package.

• If your upload speed is exactly 2Mbps, you should take these steps to improve your upload speed.

The status light located on the front of your Outdoor Security Camera Series 2 indicates key information about your camera. At a glance, it can tell you if the camera is recording or isn’t connected to Wi-Fi. The chart below shows which colors you can see on your Outdoor Camera Series 2 and what they mean.

Overview

You can customise your SimpliSafe® cameras even further by changing the motion detection to coincide with your system’s arming state. This means you can now adjust when your camera records as it is directly tied to your system’s arming state. 

For example, if you don’t want your camera to record when the system is set to OFF, but do want it to record when it is in AWAY mode, you can now control these settings.

Motion notifications are determined by your monitoring subscription. You can learn more about which service plans include push or SMS notifications on our Help Centre.

Supported Cameras

The following cameras are compatible with motion detection set by arming state:

• Wireless Outdoor Security Camera

• Outdoor Camera Series 2

• Smart Alarm Indoor Camera

How to Change These Settings

To change your motion detection based on the arming state:

1. Open the SimpliSafe® Mobile App on your phone or tablet

2. Choose My System from the bottom navigation bar

3. Select Camera Settings

4. Tap on the camera you wish to manage

5. Under Camera Behavior, tap on your arming state to adjust the settings

6. Toggle ON or OFF Motion Detection, as needed

7. Choose SAVE in the upper right corner of the app to save your selections​

NOTE: your camera will not record unless motion is detected in any arming state when the arming state is configured to detect motion.